Adapters and trailers for MTZ engine blocks. device models. Homemade options, video ratings and ratings

Overview of adapters

Motorized implement carriers have greatly simplified agricultural work in the fields for many farmers. Thanks to them, processing, plowing and planting has become easier and faster. But the design of the walk behind tractor is such that the operator has to walk behind it, which will cause fatigue and become difficult after a while. The loss of power is particularly noticeable after processing large areas, since the weight of the two-wheel tractor often exceeds 100 kg.

In order to greatly facilitate work on the walk-behind tractor, and especially in Belarus, adapters were invented that attached to the unit and allowed them to do all the work while sitting. A feature of the adapters is that all attachments are already attached to them and not to the two-wheel tractor. So, when using an adapter, it turns out small tractor with a comfortable seat and the ability to work for a long time without tiring.

Models from the manufacturer for MTZ

The manufacturer has not provided an official model, but those who want to upgrade their walk-behind tractor should pay attention to other manufacturers.

Third-party analogues for MTZ

One of the most popular adapters is the Tselina tillage module, adapted for use with the Belarusian walk-behind tractor. The adapter is made of high quality materials and allows you to sit comfortably on the seat and control the walk behind tractor. Thanks to the additional 4*10 pneumatic wheels, the construction is stable on any floor.

To make the model more versatile and to make braking easier, the adapter has a band brake. The speed that the two-wheel tractor MTZ can develop with the adapter connected can reach up to 10 km/h. However, since most attachments are not able to accelerate in this way, this is sufficient for agricultural work. The weight of the field adapter is 50 kg.

Adapter Horsam IS-2

An excellent alternative that converts the walk behind tractor into a small tractor is the Khorsam IS-2 adapter manufactured by GMZ OJSC. The design is equipped with a seat and a steering wheel, and the moving part of the walk-behind tractor is mounted at the rear. It is advisable to use it in gardens, orchards and home gardens. A comfortable seat and motorcycle-like handlebars ensure comfort and convenience when working in the fields.

All important MTZ controls are placed on the steering wheel to make the driver feel comfortable. The operator can easily access the gas, brake and engine start because Horsam can be connected to the MTZ09N. In addition, you can connect a plow, tillers, ridgers, a potato planter and an excavator, any snow removal equipment, a mower and much more to it.

The advantages of the horse are:

• Small dimensions that allow maneuvering between obstacles;
• convenience in managing a walk-behind tractor;
• weight approx. 70 kg;
• Same width between the wheels on the front and rear axles.

Homemade version for MTZ

If you want to save money on buying an adapter from the manufacturer, you can assemble such a design yourself. Below is a drawing and diagram of attaching all the parts, focusing on being seated on a walk behind tractor. The drawing shown shows how to mount a seat with bracket behind the two-wheel tractor.

To make an adapter for MTZ you will need:

• Prepare a steel profile 180 cm long.
• Vertically weld another section of the profile 50 cm long, this part will be the axis of the rear rail and will determine its width. Therefore, the length of 50 cm is conditional. It can be made longer or shorter if desired.
• Attach wheel stands to the ends. Usually the length is taken from 25 to 40 cm.
• Be sure to weld stiffeners to the bushings. Their dimensions depend on your design and its original dimensions.
• Make a frame for connecting the hitch. Attach them to the wheel stays with the side guides.
• Fix the seat in the middle of the frame. It is mounted above the frame to allow the operator to position their legs comfortably. You can choose any seat as long as you like it and it can be attached to the frame.
• When attaching the seat, pay attention to where the steering wheel is and how far it remains. The steering must be within reach.

Video Rating

Below is a video review of the adapter for the MTZ walk-behind tractor

The video review is devoted to assembling a homemade adapter for MTZ

Video review demonstrating the use of the MTZ front adapter

Possible uses of the front adapter for MTZ

Owner feedback

Many owners in their reviews note that using the Belarusian walk-behind tractor with an adapter has become much more convenient and efficient.

Nikolay:

I’m tired of running around for my MTZ 09N walk behind tractor and decide to buy an adapter. It has become easier to work with, but there are several nuances. On a flat surface, movement is ideal, without jumps, provided that a tiller and a plow are used. But with a trailer it’s a bit more difficult, because if you load a lot on the trailer, the two-wheel tractor will rear up when it hits a bump.

Constantine:

I decided to weld a homemade adapter because I didn’t see anything complicated in the drawings and diagrams. In addition, I had the necessary material and wheels with a seat. Everything was adjusted to its size and it turned out to be cheaper than the purchased one. The steering was adjusted to your height and it became easier.

Pendant for MTZ

Since the characteristics of the MTZ walk-behind tractor allow you to transport up to 300-500 kg of cargo, it is simply impossible not to use this opportunity. It is very convenient to transport not only crops, but also various materials, tools and other goods.

Relatives of the manufacturer

Belarus Smorgon Mechanical Plant presents its brand trailer PM-00.000 for motorized equipment carriers. Externally, the wagon is a classic version that uses a trailer hitch as an attachment for the walk-behind tractor. The advantage of the model is that there is a seat in the form of a tank where you can put the tool. The seat is very comfortable and the steering wheel is easy to reach.

Motorized equipment carrier trailer PM-00.000

Despite its mass of 300 kg, the PM trailer can carry up to 200 kg. Stability is achieved by installing pneumatic wheels with a ground clearance of 27 m. Strong steel was used in the manufacture of the body. The volume of the body is 0.705 cubic meters. Disadvantages include design features that do not provide for a dump truck unloading facility, as the body is welded to the frame.

Third-party analogues for MTZ

An analogue is the improved model MP-480, which has a number of advantages: the ability to transport goods weighing up to 500 kg and a collapsible body type. The reinforced construction prevents the trailer from tipping over during cargo transport. Additional shields are supplied with the carriage, allowing you to increase the height of the side with special fasteners. The seat is made in the form of a convenient box where you can store the necessary tools.

#gallery-1 { margin: auto; } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; } /* see gallery_shortcode() in wp-includes/media.php */

From different manufacturers you can find a large number of trailers not only of different shapes, but also in carrying capacity. Belarusmash presents the TM-360 and 350 models, Akimovsky Metallurgical Plant – TM 500-700. The design principle of the structure is the same, but the differences lie in some nuances, for example, the presence of wings over the wheels or the ability to tilt the side of the body.

Homemade version for MTZ

Like many other devices, the wagon can also be made by hand. In addition, the homemade version will not be inferior to the branded version. It is only important to carefully study the diagram below.

Pendant Making Technique:

• Make a frame out of a square tube.
• The best option is a dump body with folding side walls, so let’s do that. The body is welded from sheets of iron or aluminum, whichever is at hand.
• Fix the frame to the body, providing the ability to tilt the body independently.
• Install the seat in front of the body. It is necessary for comfortable movement on a walk-behind tractor. It is necessary to calculate the distance from the steering wheel to the seat so that it is convenient to control.

Video Rating

The video review shows how to assemble a trailer for Belarus yourself

Overview of the dump truck for the two-wheel tractor MTZ

Owner Feedback

Reviews from owners confirm that using a walk-behind tractor to transport goods is quite realistic and widespread. In fact, a walk behind tractor can replace a tractor.

Alexander:

I had no intention of doing a trailer by myself for the simple reason that my hands were in the wrong place. So I bought the TS-350 and have no regrets. You have to work almost every day, and with a trailer it has become easier not only to get around, but also to transport the crop. With him it is easy to handle. Downhill and uphill, my Belarus pulls perfectly.

Valentine’s Day:

Of course it is good to use a trailer, but it is important on which road. When the soil erodes and there is dirt everywhere, Belarus can falter. And if the road is good, a speed of up to 10 km/h can be reached. If it slips, you need to reduce the amount of cargo. But that’s better than nothing.