Electric saws brand Krüger. Description, characteristics and rules of use

Kruger is a European manufacturer of garden equipment and power tools. Their products are of high quality, low cost and excellent performance. The Krüger brand can be found throughout our country.

The widespread distribution of Kruger brand instruments in Eastern Europe occurred in the late XNUMXs, and they almost immediately gained the trust of hundreds of thousands of consumers. All devices of the brand are configured with increased performance and expanded. And the assembly process is fully controlled by German specialists with their natural pedantry.

The most common model of Krüger electric chainsaw is ECSK 25-40. It is ideal as a home help for summer residents and country residents. The electric saw is equipped with a 2.5 kW motor. This is enough not only for preparing firewood for the winter period, but also for uprooting trees and carrying out small construction works.

Automatic lubrication system for Kruger electric saw chains ECSK 25-40 allows you to extend the service life.

The built-in anti-vibration system absorbs most of the outgoing vibrations, reduces the stress on the joints and ensures comfortable work for the operator.

Electric saw Kruger ECSK 25-40

You can’t just turn on the Kruger electric chainsaw. It has an anti-lock braking system that protects against accidental starts.

To ensure the safety of the operator in the event of a chain breakage, on the Krüger electric saw ECSK 25-40 an automatic chain brake is installed, which works in less than 0.2 seconds.

The body of the electric chainsaw is made of high-impact plastic, which protects the motor from accidental damage.

Technical data of the Krüger electric saw ECSK 25-40

• Saw Type: Electric Chainsaw
• Motor Position: Side
• Electric motor power, W: 2500
• Chain circulation speed, m/s: 14
• Tire length, mm: 400
• Chain pitch, inch: 3/8
• Oil tank volume, l: 0.22
• Weight, kg: 5
• Complete set: saw, tires – 2 pcs, chain – 2 pcs, protective cover, wrench, instruction manual, warranty card.

operation manual

Before working with the Krüger Electric Chainsaw, be sure to read the instruction manual for safe operation of this tool.

A power source is required to operate the Krüger electric saw. Convenient and uninterrupted work with a chainsaw is provided by wearing the necessary length. Such an extension cord must be of high quality and withstand voltage drops, of course, you should not skimp on it.

Before working with the Krüger electric saw, be sure to check that the entire cord is in good condition and that there are no violations of its sealing. Do not let the cord touch sharp or hot objects during operation or storage.

During work, the cord must be behind the Krüger electric saw, as branches may fall on it and cause disturbance and injury to the operator.

The Krüger electric chainsaw should only be operated in dry and clear weather. Moisture entering the mechanism can cause a short circuit.

Particular attention should be paid to operation in winter. Before turning on the Krüger chainsaw, put it in a warm place for about 2-3 hours so that the moisture evaporates completely, and only then start the device.

If during or before the start of work any malfunctions are detected (damage to the handles or the presence of cracks on the body, sparks from the carbon brushes, smoke or an extraneous smell), you should immediately stop work and fix it.

When working with a Krüger chainsaw, the operator must wear protective clothing: goggles, overalls, boots.

Service

To ensure that Krüger chainsaws last as long as possible without failures, regular maintenance should be carried out in accordance with the operating instructions. Before starting any work, make sure that chain lubricant is available. It should be at least ¼ tank. Top up if necessary. Only use Krüger chainsaw oil recommended by the manufacturer.

The tire is responsible for the rotation of the chain on the Kruger electric saw and tends to wear out from one side or the other on a regular basis. In order to make the wear process even, it is necessary to regularly turn the tire.

Before use, make sure that the braking system of the Kruger electric saw is working properly. To do this, give a small amount of gas and then stop the operation of the electric saw.

The greatest load during work falls on the chain. And it tends to get boring and fail on a regular basis. The first signs that the chain is dull are:

1. Excessive vibration.
2. Increased lubricant consumption.
3. Get an uneven cut.
4. Complicated sawing process.
5. The rules for correct sharpening can be found in the user manual.

Chainsaw KRÜGER owner ratings:

Sergei, 35 years old, Kirov:

“I bought my Kruger over 5 years ago. And since then I have been 100% satisfied with the device. In my household she saws everything. And I cut down trees without any problems and prepare firewood for a bathhouse quite quickly. Always cuts wood perfectly. For those who are afraid of the cable, I want to assure you that with proper handling there will be no problems with it.

Alexey, 57 years old, Moscow:

“For me, an electric saw has always been better than a gas saw. I didn’t intend to work with her anywhere in the forest, just tending the garden and storing firewood. It is economical, easy to maintain and use every day. In two years I’ve only changed the chain and bar once (and there were two of them in the kit, meaning I didn’t spend any money on them). In the garden he cuts everything in a row, when I remember how many times I climbed with a hacksaw, my back starts to hurt)

Plus: Great device at a great price

Cons: You don’t get used to the wire right away, but that’s temporary

On the territory of the Russian Federation there are dozens of official KRUGER dealers who have a chainsaw ECSK 25-40 in stock. Here are some of them :

– Krüger PRO

– KRÜGER.TOOLS

– Krueger™

{{ d_37 }}