The Husqvarna 137 chainsaw is the brainchild of the famous Swedish manufacturer Husqvarna, which was founded back in 1689. Initially, the company was engaged in the manufacture of weapons for the army (until 1970), later it was retrained and started the production of garden equipment and tools, construction tools. Over the long years of its existence, the company has grown into the owner of several brands and established itself as a proven manufacturer whose devices continue to confidently lead the world market.
Chainsaw “Husqvarna” 137, model description
The Husqvarna 137 chainsaw is currently out of production, but it remains a competitive tool, characterized by high performance, durability and ease of maintenance (the owner of the device, having all the necessary spare parts, can obtain the necessary repair and maintenance tools). Carry out adjustment work with his own hands). This modification of the chainsaw is successfully used for sawing logs and boards (longitudinal, transverse and diagonal), trimming crowns, trimming branches, and in construction.
The weight of the chainsaw without the headset is 4.6 kg, with the full equipment 5.5 kg. A 2.18 liter X-Torq two-stroke internal combustion engine with carburetor is housed in a robust housing. With. To start the Husqvarna chainsaw, a spring-loaded inertia starter is provided to make the starting process easier. The system of forced air injection “Air Inzhekshin” is installed. Double air cleaning increases the service life of the air filter or the chainsaw itself. The ignition system is contactless. Thanks to the built-in “Auto Tune” system, the carburetor is automatically tuned. To increase safety when working with the device, there is an inertia chain brake that activates in the event of kickback, a hand guard, low-vib vibration protection and a silencer.
The chain tensioning mechanism is located on the side of the Husqvarna 137 chainsaw. A special universal screwdriver key is used to mount the bar and adjust the chain tension. For this modification of the gasoline chainsaw, H30 tires with a size of 13 inches (33 cm) are used, options with tires from other manufacturers with a length of no more than 38 cm are possible. The lubrication of the chain mechanism is carried out automatically when the chain moves.
Specifications Husqvarna 137
engine | 137 | ||
cylinder volume, cu. cm | 36 | ||
The piston stroke, mm | 32 | ||
Idle speed, rpm | 3000 | ||
Recommended maximum no-load speed, rpm | 13000 | ||
Power kW | 1.6 | ||
Ignition system | |||
Manufacturer | RE Phélon | ||
Type of ignition system | CD | ||
Spark plug | Champion | ||
Distance between electrodes, mm | 0.5 | ||
Fuel and lubrication system | |||
Manufacturer | Walbro | ||
carburetor type | WT-660 | ||
Fuel tank capacity, l | 0.37 | ||
Oil pump capacity at 8500 rpm, ml/min | 6 – 8 | ||
Chain oil tank capacity, l | 0.19 | ||
Type of oil pump | machine. | ||
weight | |||
Without tire and chain, kg | 4.6 | ||
Noise level | |||
Equivalent sound pressure level at the operator’s ear, measured according to international standards, dB(A) | 98 | ||
Equivalent sound power level measured according to international standards, dB(A) | 108 | ||
Vibration level | |||
front grip, m/s2 | 4.9 | ||
Rear handle, m/s2 | 7.7 | ||
tyres/gears | |||
Standard tire length, inches/cm | 13 / 33 | ||
Recommended tire length, inches/cm | 13 / 33 | ||
Useful Cutting Length, inches/cm | 12.5 / 32 | ||
pitch, inches | 0.325 | ||
Thickness of leading link, mm | 1.3 | ||
Number of teeth on the drive wheel | 7 | ||
Mature | Цепь | ||
Length, inches | Pitch, inches | max. tire end radius | |
13 | 0.325 | 10T | Husqvarna H30 |
15 | 0? 325 | 10T | Husqvarna H30 |
Properties
- Light weight.
- Carburettor ICE X-Torq.
- The power of the petrol engine is 2.18 liters. With.
- Walbro WT-660 carburetor.
- Simple starting system.
- Air Inzhekshin – additional air supply.
- Double cleaning of the air entering the carburetor.
- CD ignition system.
- Carburettor auto-tuning.
- “Low Vib” anti-vibration system.
- Automatic chain lubrication.
- Compact size
- Mobility, lack of attachment to a power source.
Operating Instructions
Every Husqvarna chainsaw comes with a user manual. The briefing introduces the owner of the device to the tool, teaches the working procedures and methods, and also draws attention to the proper maintenance of the petrol unit. The operating instructions consist of the following sections:
- Husqvarna 137 chainsaw device, step-by-step assembly of the device, according to the detailed descriptions from the manual.
- Safety measures during operation and maintenance.
- Technical characteristics.
- Reception and methods of sawing.
- Preparing the Husqvarna 137 chainsaw for operation.
- Chainsaw breaks.
- Services.
- Troubleshooting the Husqvarna 137 chainsaw.
- Equipment.
Chainsaw Kit
- chain;
- original tires;
- screwdriver;
- protection.
Basic security measures
- Put on overalls, protect hands.
- Secure your job.
- Transport the chainsaw with the high-voltage cable disconnected and the fuel and oil tanks tightly closed.
- Refuel the chainsaw outside the work area.
- Learn the tricks and methods of sawing.
- Do not allow strangers into the area where sawing work is being carried out.
Starting up the Husqvarna 137 chainsaw
To ensure the long-term operation of the Husqvarna petrol saw, you need to follow a few simple steps:
- Assemble the unit.
- Mount the headset, tension the chain.
- Prepare the fuel mixture, refuel the chainsaw.
- Fill fresh oil into the oil tank.
- Start the chainsaw as described in the manual.
- Check the functionality of the brake system.
- Check the operation of the saw at idle, adjust the carburetor if necessary.
- Make sure that the correct amount of oil is supplied to the chain.
- The Husqvarna 137 chainsaw is tested.
The fuel mixture consists of high-quality AI-92 petrol and original Husqvarna engine oil for two-stroke engines in a ratio of 50/1, with 5 liters of petrol for 100 ml of engine oil.
Walking in a chainsaw
The run-in time is 10 hours. During this time it is not recommended to load the tool, the load should not be more than half the power of the power plant. During the running-in period, the moving parts of the power plant are run in. In the event of an overload of the tool, the piston can jam, which can lead to failure of the power unit, and therefore the chainsaw itself.
Husqvarna 137 petrol chainsaw maintenance
What is chain saw maintenance? First of all:
- Clean the air and fuel filters.
- Spark plug service.
- Brake control.
- Repair chainsaw carburetor.
- Clean oil-carrying tubes.
- Cleaning the chainsaw from chips and dirt.
- Chainsaw sprocket replacement.
- Checking the reliability of fasteners.
- chain sharpening.
- Saw bar service.
- Adjust the ignition if necessary.
Proper preparation for storage
New owners of devices are interested in the following questions:
- how to adjust the carburetor on a Husqvarna 137 chainsaw;
- Where is the vent on a Husqvarna 137 petrol chainsaw?
- how to change the sprocket on a chainsaw etc.
Carburettor adjustment
After breaking in, some chainsaw owners adjust the carburetor. It consists of several stages:
- Start the saw, turn the high and low speed adjustment screws until they stop. turn back 1.5 turns;
- Warm up the saw for about 10 minutes. Adjust the idle speed with the idle screw. With the correct settings, the chain will not move on the bar when idling;
- Check the saw for acceleration. When you press the gas pedal, the speed should increase quickly.
Before you start adjusting the carburetor on the chainsaw yourself, we recommend watching a video that shows how to properly disassemble the Husqvarna 137 chainsaw and how to set it up yourself directly.
Montage und Demontage der Husqvarna 137 Kettensäge, Einstellung
Kupplungswechsel, essen Sie ein verschlissenes Kettenrad von einer Husqvarna 137 Kettensäge und ersetzen Sie es
Das Bemerkenswerte an Husqvarna Kettensägen ist, dass der Besitzer des Gerätes das Gerät selbst zerlegen und zusammenbauen, ein verschlissenes Teil ersetzen, die Kolbengruppe (Wurfringe) aussortieren kann.
Fehlfunktionen der Husqvarna-Kettensäge “137
Schauen wir uns die Gründe an, warum eine Husqvarna-Kettensäge möglicherweise nicht startet oder unter Last stehen bleibt:
- Der Kraftstofftank ist leer.
- Mischung von schlechter Qualität.
- Es ist Wasser im Kraftstoffgemisch.
- Es gibt keinen Funken auf der Kerze.
- Die Zündkerze ist nass oder kaputt.
- Kaputter Draht.
- Vergaser nicht abgestimmt.
- Filter verstopft.
Warum hat die Ölzufuhr zur Kette aufgehört:
- Leerer Öltank.
- Ölleitungen verstopft.
Wir laden Sie ein, sich damit vertraut zu machen Husqvarna Benzinkettensäge Handbuch 137.
Videobewertung
Arbeiten mit einer Husqvarna 137 Kettensäge
Eigentümer-Feedback
Wadim, 40 Jahre alt
Meine Husqvarna ist fast 5 Jahre alt. Es funktioniert ohne Probleme, und obwohl diese Modifikation nicht mehr mit Verbrauchsmaterialien hergestellt wird, gibt es auch keine Probleme. Kompakt, einfach zu bedienen, Öl ist natürlich teuer, aber das Werkzeug ist sehr hochwertig – sowohl im Aufbau als auch im Betrieb, daher ist es ein Verbrechen, es mit billigen Ölen zu zerstören.
Vorteile: zuverlässig, langlebig, bequem, leistungsstark.
Nachteile: Teures Öl.
Igor, 35 Jahre alt
Die Säge ist ausgezeichnet, ich habe meinen Vater in der Garage gefunden, aussortiert, etwas ausgetauscht – es funktioniert! Geeignet sowohl für das Sägen von Baumstämmen als auch für den Bau. Ich benutze es seit 1,5 Monaten fast jeden Tag. Der Motor ist ausgezeichnet, und man kann nicht sagen, dass er lange Zeit im Leerlauf war.
Vorteile: universell, bequem, langlebig, wartbar, es gibt Ersatzteile.
Nachteile: nicht gefunden.
Andrej, 44 Jahre alt
Ich habe mir eine Kettensäge 137 bu gekauft. Obwohl nicht neu, der Preis ist solide, aber es ist nicht schade – es springt leicht an, es ist genug Leistung für alle Aufgaben vorhanden.
Vorteile: Leistungsstark, funktioniert hervorragend.
Nachteile: teuer.