Stihl-tools.com

Gardening and landscaping
23 View
Article Rating
1 звезда2 звезды3 звезды4 звезды5 звезд

Husqvarna 120 Mark II problems, specifications, maintenance, experience and owner reviews

Overview chainsaw Husqvarna 120 Mark II

The Husqvarna 120 Mark II is an easy-to-use, versatile chainsaw designed with homeowners in mind. It is characterized by its high cutting performance, which makes sawing wood, light felling work and pruning branches easier. Thanks to the X-Torq® engine technology, it offers low emissions and air injection that keeps the filter clean.

Husqvarna 120 Mark II
Husqvarna 120 Mark II

Who is it for and where can it be used?

The Husqvarna 120 Mark II is ideal for homeowners who need a reliable and heavy-duty chainsaw for various jobs around the home, such as chopping wood, light felling and trimming branches.

Where are Husqvarna 120 Mark II chainsaws made?

Husqvarna is a Swedish company and many of its products are manufactured in Sweden. However, the exact place of production can vary depending on the product and the time of production.

Chainsaw Husqvarna 120 Mark II: Specifications

propertyValue
Engine power1.4 kW
Displacement38.2 cm³
Chain speed at maximum power16.8 m/s
CO2 emissions (CO2 EU V)957 g/kWh
Recommended minimum rail length35 cm
Recommended maximum rail length45 cm
chain pitch3/8″ Mini
chain typeH37
rail length35 cm
Weight (without cutting equipment)4.85 kg
Sound level at operator’s ear100.7 dB(A)
Sound power level, LWA113 dB(A)
Equivalent vibration level (ahv,eq) front/rear handle2.1 m/s² / 2.7 m/s²

Operating instructions

OM. Husqvarna. 120 marks II. 2020-02

Equipment list: Which accessories are action packs?

The exact equipment list may vary depending on the place and time of purchase. In general, the Husqvarna 120 Mark II chainsaw can be supplied with the following accessories:

  1. protective cover for the chain
  2. combination key
  3. Operating instructions
Weiterlesen:
Stihl MS 162 vs MSE 170 - Which chainsaw should I choose?

Chain for chainsaws: which ones are there?

The Husqvarna 120 Mark II uses an H37 chain with a 3/8″ mini chain pitch.

Chainsaw change chain Instructions Husqvarna 120 Mark II

To change the chain on a Husqvarna 120 Mark II chainsaw, follow these general steps:

  1. Make sure the saw is switched off and has cooled down.
  2. Loosen the nuts on the sprocket cover and remove the cover.
  3. Turn the chain tensioning screw counterclockwise to loosen the chain.
  4. Take off the old chain and put the new chain around the guide bar bar and the drive wheel.
  5. Pull the chain tensioning screw clockwise to tension the chain. It should be pressed firmly against the sword, but still be able to move easily.
  6. Replace the sprocket cover and tighten the nuts.
  7. Check the tension of the chain again and adjust if necessary.

Performance and experience Handling the chainsaw

The Husqvarna 120 Mark II is known for its high performance and easy handling. The engine’s X-Torq® technology offers excellent fuel efficiency and reduces emissions. The chainsaw also has an effective anti-vibration system that reduces the strain on the user’s hands.

What are the main faults Husqvarna 120 Mark II

The most common problems reported by users when using the Husqvarna 120 Mark II chainsaw are related to:

  1. Difficulty starting the saw
  2. Insufficient chain tension leading to poor performance
  3. Wear of the chain and guide bar with intensive use

Why won’t my gas saw start? List of possible causes

There are a number of reasons why a gas powered saw may not start:

  1. Clogged Air Filter: A clogged air filter can restrict air flow to the engine and make starting difficult.
  2. Old or wrong gasoline: Gasoline becomes less effective over time. It is important that you use fresh gasoline and make sure it is the correct mix ratio for your saw.
  3. Defective spark plug: A defective or dirty spark plug can also cause starting problems.
  4. Carburetor problems: If your saw’s carburetor is not properly adjusted, or if it is dirty or defective, this can cause your saw not to start.

Maintenance and care of the chainsaw Husqvarna 120 Mark II

Basic setting, fuel mixture, mixture ratio, starting

The basic setting of the saw should always correspond to the operating instructions. A 50:1 ratio is recommended for the petrol mixture, i.e. 50 parts petrol to 1 part two-stroke oil.

To start the saw, make sure that the chain and guide bar are correctly fitted and that the chain tension is set correctly. Then pull the choke fully out and pull the starter cord several times until the engine starts.

Important maintenance instructions for a long service life

Regular maintenance of your Husqvarna 120 Mark II chainsaw is crucial to its longevity. Here are some key points to keep in mind:

  1. Check the chain tension regularly and adjust if necessary.
  2. Clean the air filter regularly to ensure optimal air flow to the engine.
  3. Check and clean the spark plug regularly.
  4. Thoroughly clean the saw after each use to remove accumulations of sawdust and dirt.
  5. Store the saw in a dry and clean place to avoid corrosion and damage.

Video test: Husqvarna 120 Mark II chainsaw test

Advantages and disadvantages of the Husqvarna 120 Mark II model: comparison table

Advantages Disadvantages
High performance thanks to the X-Torq® motorCan be difficult to start
Effective anti-vibration systemChain tension must be checked regularly
Easy maintenance and careChain and bar can wear out with intensive use
Light and easy to handle

Which models of other chainsaw brands are comparable to the Husqvarna 120 Mark II chainsaw?

Some models comparable to the Husqvarna 120 Mark II chainsaw could be the Stihl MS 170, stihl ms 180 or the Echo CS-310 chainsaws. These models offer similar performance characteristics and are designed for the same area of ​​application.

Husqvarna 120 mark ii vs stihl ms 170

The Husqvarna 120 Mark II and the Stihl MS 170 are both chainsaws designed for home use. Both models are known for their durability, efficiency and performance. Here is a comparison of these two chainsaws:

FeatureHusqvarna 120 Mark IIStihl MS 170
Displacement38.2 cm³30.1 cm³
Performance1.4 kW1.3 kW
Fuel efficiency technologyX-Torq®2-MIX
Weight (without cutting equipment)4.85 kg4.1 kg
Anti-vibration systemYesYes
Special functionsCentrifugal Air Purification SystemEmatic™ lubrication system
PriceUsually a bit more expensiveUsually a bit cheaper

*Please note that actual prices may vary by retailer and the above prices are for general guidance only. Both saws have their own merits and may be more suitable depending on your specific needs.

Husqvarna 120 mark ii vs stihl ms 180

FeatureHusqvarna 120 Mark IIStihl MS 180
Displacement38.2 cm³31.8 cm³
Performance1.4 kW1.5 kW
Fuel efficiency technologyX-Torq®2-MIX
Weight (without cutting equipment)4.85 kg4.1 kg
Anti-vibration systemYesYes
Special functionsCentrifugal Air Purification SystemEmatic™ lubrication system
PriceUsually a bit more expensiveUsually a bit cheaper

Husqvarna 120 mark ii vs Echo CS-310

When choosing between the Husqvarna 120 Mark II and the Echo CS-310 chainsaw, there are a few key differences to consider. Below you will find a tabular overview of these differences:

FeatureHusqvarna 120 Mark IIEcho CS-310
Displacement38.2 cm³30.5 cm³
Performance1.4 kW1.1 kW
Fuel efficiency technologyX-Torq®i-30™ launch system
Weight (without cutting equipment)4.85 kg3.9 kg
Anti-vibration systemYesYes
Special functionsCentrifugal Air Purification SystemG-Force Engine Air Pre-Cleaner™
PriceUsually a bit more expensiveUsually a bit cheaper

In terms of price, the Echo CS-310 is usually a little cheaper, although actual prices may vary by retailer.

Conclusion: is it worth buying the chainsaw?

The Husqvarna 120 Mark II is a powerful and user-friendly chainsaw that is suitable for a wide range of applications. With the right maintenance and care, it can be a reliable and efficient addition to your tool arsenal. However, before making the purchase decision, you should consider your specific needs and intended use.

Ссылка на основную публикацию