Adapters and trailers for MTZ engine blocks. Device models. Homemade options, video reviews and ratings

Overview of adapters

Motorized implement carriers have greatly simplified agricultural work in the fields for many farmers. Thanks to them, processing, plowing and planting have become easier and faster. But the design of the walk-behind tractor is such that the operator has to walk behind him, which after a while causes fatigue and becomes difficult. The loss of power is particularly noticeable after processing large areas, as the weight of the walk-behind tractor often exceeds 100 kg.

To greatly facilitate work on the walk-behind tractor, and especially in Belarus, adapters were invented that were attached to the unit and allowed them to do all the work while sitting. A feature of the adapters is that all attachments are already attached to them and not to the walk-behind tractor. So, when using an adapter, you get a small tractor with a comfortable seat and the ability to work for a long time without fatigue.

Models from the manufacturer for MTZ

The manufacturer has not provided an official model, but those who want to upgrade their walk-behind tractor should pay attention to other manufacturers.

Third-party analogues for MTZ

One of the most popular adapters is the Tselina agricultural module, adapted for use with the Belarusian walk-behind tractor. The adapter is made of high quality materials and allows you to comfortably sit on the seat and control the walk-behind tractor. Thanks to the additional 4*10 pneumatic wheels, the construction stands stable on any floor.

To make the model more versatile and make braking easier, the adapter has a band brake. The speed that the MTZ walk-behind tractor can develop with the adapter connected can reach up to 10 km/h. Since most attachments are not able to accelerate like that, this is enough for agricultural work. The weight of the field adapter is 50 kg.

Adapter Horsam IS-2

An excellent alternative that turns the walk-behind tractor into a small tractor is the Khorsam IS-2 adapter, manufactured by GMZ OJSC. The design is equipped with a seat and a steering wheel, and the moving part of the walk-behind tractor is mounted at the rear. It is advisable to use it in gardens, orchards and home gardens. A comfortable seat and motorcycle-like handlebars ensure comfort and convenience during field work.

All important MTZ controls are placed on the steering wheel for the driver’s comfort. The operator can easily access the accelerator, brake and engine start because the Horsam MTZ09N can be connected. In addition, you can connect a plow, tiller, hiller, potato planter and excavator, any snow removal equipment, mower and much more to it.

The advantages of the horse are:

• Small dimensions that allow maneuvering between obstacles;
• Convenience of managing a walk-behind tractor;
• Weight approx. 70 kg;
• Same width between the wheels on the front and rear axle.

Homemade version for MTZ

If you want to save money when purchasing an adapter from the manufacturer, you can assemble such a design yourself. Below is a drawing and diagram of fastening all parts, focusing on seating on a walk-behind tractor. The drawing shown shows how a seat with bracket is installed behind the walk-behind tractor.

To make an adapter for MTZ you need:

• Prepare a 180 cm long steel profile.
• Weld vertically another section of the profile 50 cm long. This part will become the axis of the rear rail and determine its width. Therefore the length of 50 cm is conditional. It can be made longer or shorter if desired.
• Attach wheel stands to the ends. Usually the length is taken from 25 to 40 cm.
• Be sure to weld stiffeners to the bushings. Your dimensions depend on your design and its original dimensions.
• Make a frame for connecting the trailer hitch. Attach them to the wheel struts using the side guides.
• Attach the seat to the center of the frame. It is mounted above the frame to allow the operator to position their legs comfortably. You can choose any seat as long as you like it and can be attached to the frame.
• When attaching the seat, pay attention to where the steering wheel is and how far it remains. The steering must be within reach.

Video Rating

Below is a video review of the adapter for the MTZ walk-behind tractor

The video review is devoted to assembling a homemade adapter for MTZ

Video review demonstrating the use of the MTZ front adapter

Possible uses of the front adapter for MTZ

Owner Feedback

Many owners note in their reviews that using the Belarusian walk-behind tractor with an adapter has become much more convenient and efficient.

Nikolay:

I’m tired of running around for my MTZ 09N walk-behind tractor and decide to buy an adapter. It has become easier to work, but there are several nuances. On a flat surface the movement is ideal, without jumps, provided that a cutter and a plow are used. But with a trailer it’s a little more difficult because if you load a lot onto the trailer, the walk-behind tractor will rear up when it hits a bump.

Constantine:

I decided to weld a homemade adapter because I didn’t see anything complicated in the drawings and diagrams. In addition, I had the necessary material and wheels with a seat. Everything was adjusted to its size and it turned out to be cheaper than the purchased one. The steering was adjusted to your height and it became easier.

Trailer for MTZ

Since the characteristics of the MTZ walk-behind tractor allow you to transport up to 300-500 kg of cargo, it is simply impossible not to take advantage of this opportunity. It is very convenient to transport not only the crops, but also various materials, tools and other goods.

Relatives from manufacturer

For motor equipment users, Belarus Smorgon Mechanical Plant presents its brand trailer PM-00.000. Externally, the wagon is a classic version that uses a trailer hitch as an attachment for the walk-behind tractor. The advantage of the model is that there is a seat in the form of a tank where you can place the tool. The seat is very comfortable and the steering wheel is easy to reach.

Motor equipment carrier trailer PM-00.000

The PM trailer can carry up to 200 kg despite its mass of 300 kg. Stability is achieved by installing pneumatic wheels with a ground clearance of 27 m. Strong steel was used in the manufacture of the body. The volume of the body is 0.705 cubic meters. The disadvantages include design features that do not provide for the possibility of dump truck unloading, since the trough is welded to the frame.

Third-party analogues for MTZ

An analogue is the improved model MP-480, which has a number of advantages: the ability to transport goods weighing up to 500 kg and a collapsible body type. The reinforced construction prevents the trailer from tipping over during cargo transportation. Additional shields are supplied with the cart, allowing you to increase the height of the side using special fasteners. The seat is made in the form of a convenient box where you can store the necessary tools.

#gallery-1 { margin: auto; } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; } /* see gallery_shortcode() in wp-includes/media.php */

From different manufacturers you will find a large number of trailers not only in different shapes, but also in load capacity. Belarusmash presents models TM-360 and 350, Akimovsky Metallurgical Plant – TM 500-700. The design principle of the structure is the same, but the differences lie in some nuances, for example, the presence of wings above the wheels or the ability to tilt the side of the body.

Homemade version for MTZ

The cart, like many other devices, can also be made by hand. In addition, the homemade version will not be inferior to the branded version. It is only important to carefully study the diagram below.

Pendant Making Technique:

• Make a frame from a square tube.
• The best option is a dump body with folding side walls, so we’ll do that. The body is welded from sheets of iron or aluminum, depending on what is at hand.
• Attach the frame to the body and provide the ability to tilt the body independently.
• Install the seat in front of the body. It is necessary for comfortable movement on a walk-behind tractor. It is necessary to calculate the distance from the steering wheel to the seat so that it is comfortable to control.

Video rating

The video review shows how to assemble a trailer for Belarus yourself

Overview of the dump truck for the MTZ walk-behind tractor

Owner Feedback

Reviews of owners confirm that the use of a walk-behind tractor to transport goods is quite realistic and widespread. In fact, a walk-behind tractor can replace a tractor.

Alexander:

I didn’t plan on making a trailer on my own, for the simple reason that my hands were in the wrong place. That’s why I bought the TS-350 and haven’t regretted it. They have to work almost every day, and with a trailer it has become easier not only to move around but also to transport the crops. It is easy to handle with him. My Belarus pulls perfectly downhill and uphill.

Valentine’s Day:

Of course it’s good to use a trailer, but it matters which road. If the soil is eroding and there is dirt everywhere, Belarus can falter. And on good roads, a speed of up to 10 km/h can be achieved. If it slips, you need to reduce the amount of cargo. But that’s better than nothing.